Specifications

8
Subject to change without notice
49
1
48 47 46 4550515253
2
54
A
B C D
2 Familiarize yourself with your new HAMEG
Digital Storage Oscilloscope
2.1 Frontview
The following controls and inputs/outputs are located on the
front: Power switch
1
, the control panel
2
,
A
,
B
,
C
,
D
, the BNC
connectors of the analog inputs
45
to
48
, the probe adjustment
output
50
, the connectors for the optional logic probes HO3508
51 52
, a USB port for USB sticks
53
, the TFT screen
54
and the
LED
49
for showing activity on the remote interface.
STOP
TiPP
Please note, the connectors for the active logic probes
HO3508
51 52
are solely for theses probes. Connecting
anything else could destroy the inputs!
2.2 Controlpanel
The controls on the front panel allow direct access to the most
important functions; all extended functions are available via the
menu structure by using the grey soft keys. The power switch
1
is clearly set apart by its red colour. The most important
controls are backlighted by coloured LEDs in order to imme-
diately indicate the actual settings. The panel is subdivided in
these four areas:
Area
A
This area encompasses these three portions: CURSOR/MENU
– ANALYZE – GENERAL.
In the portion CURSOR/MENU you nd the cursor functions
6 8
, the general cursor select and adjustment knob
4
, the
Intensity/Persistence key
7
, and the key for the selection of
virtual screen.
The portion ANALYZE allows direct selection of FFT
9
displays,
the Quick-view mode
10
(all important parameters of the ac-
tual signal display), and the „Automeasure“ function
11
for the
automatic measurement of parameters.
The portion headed GENERAL comprises the following keys:
SAVE/RECALL
12
for saving and recalling instrument settings,
reference signals, signals, screen displays, and sets of for-
mulae, HELP
16
, DISPLAY
14
for access to the general display
settings, AUTOSET
15
, SETUP
13
for access to the general
settings (e.g. the language), FILE/PRINT
17
.
Area
B
:
In the portion CHANNEL CONTROL
you nd all controls of the analog
channels such as the position cont-
rol knob
18
, the XY mode select key
19
, the vertical gain adjustment
knob
20
, the extended menu func-
tions key
21
, the channel select
keys
22
to
25
, (the two-channel
version HMO3522 has only
22 23
)
which also serve as the selection
keys for the optional logic probes
Fig. 2.2:
Area A of the
control panel.
3
A
5
15
16
8
11 14
9
10
6
7
12 13
4
17
18
B
19
20
22
23
24
21
25
26
27
Fig. 2.1: Frontview of the HMO2524
Fig. 2.3: Area B of the
control panel.
Introduction
Introduction