Installation guide

Criteria Requirements

deployment

2 GB minimum for larger environments

4 GB minimum for very large environments

(more than a million entries)

You must use the largefile command to

configure database files larger than 2 GB.

Other To run the Directory Server using port

numbers less than 1024, such as the default

port 389, you must setup and start the

Directory Server as root, but it is not

necessary to run the Directory Server as

root.

Table 2.4. HP-UX 11i

2.3.1. HP-UX Patches

The HP-UX 11i host must have the correct packages and dependencies installed to run

Directory Server. The patch list changes daily, so check the HP site regularly to ensure you

have the latest releases:

• http://www.software.hp.com/SUPPORT_PLUS/qpk.html

• http://welcome.hp.com/country/us/eng/support.htm

The first package to install is the PHSS_30966: ld(1) and linker tools cumulative patch.

The other required patches are listed in Table 2.5, “HP-UX 11i Patches”. Run the dsktune utility

to see if you need to install any other patches. dsktune helps verify whether the appropriate

patches are installed on the system and provides useful information for tuning your kernel

parameters for best performance. For information on dsktune, see Section 2.1, “Using

dsktune”.

Criteria Requirements

GOLDAPPS11i B.11.11.0406.5 Gold Applications Patches for

HP-UX 11i v1, June 2004

GOLDBASE11i B.11.11.0406.5 Gold Base Patches for HP-UX

11i v1, June 2004

GOLDQPK11i HP-UX 11i Quality Pack patch from June

2004 or later

Table 2.5. HP-UX 11i Patches

HP-UX 11i