Specifications

Using the Configuration CLI Commands
85
Configuration CLI Commands
Note: Please allow sufficient time for the approval and synchronization
process to occur.
Modifying the IP
address of a
managed device
To modify the IP address of a managed device:
1. To modify the IP address of a managed device, run:
[root@LinuxGW Gateway]# ./manage_device
--modify-device --model Symmetrix-GW --host
168.159.16.12 --serialnumber HK192699998
Figure 57 manage_device --modify-device command
2. When you send the revised IP address to EMC, the update will
not take effect until it has been approved by an authorized EMC
Global Services professional.
3. When prompted, confirm the device you wish to edit. The
previous IP address will be displayed until the edit has been
approved by an authorized EMC Global Services professional via
the EMC enterprise.
4. Once the request has been approved via the EMC enterprise, and
the synchronization process completes, then run the
manage_device -- list command to view the newly added device.
Please allow sufficient time for the approval and synchronization
process to occur, then perform the list command.
Unmanaging a
device
To unmanage a managed device:
1. To unmanage a managed device, run:
[root@LinuxGW Gateway]# ./manage_device
--remove-device --model Symmetrix-GW --host
168.159.16.12 --serialnumber HK192699998
Figure 58 manage_device --remove-device command
2. The update will not take effect until it has been approved by an
authorized EMC Global Service professional via the EMC
enterprise. The device will remain listed as a managed device
until the removal has been approved.