Specifications

Using the Configuration CLI Commands
83
Configuration CLI Commands
Managing devices
To manage or view devices, run the manage_device --list command
as follows:
[root@LinuxGW Gateway]# ./manage_device --list
Serial Number Model Status IP
Address
FNM00104600112-BLOCKBVNX-GW online
10.241.216.231
FNM00104600112-BLOCKAVNX-GW online
10.241.216.230
APM00113910434 VNXe-GW online
10.241.168.35
HK192699998 Symmetrix-GW online
168.159.16.12
APM00084902090-A EDL-Engine-GW online
10.241.216.99
APM00084902090-B EDL-Engine-GW online
10.241.216.100
FOX110905RG Switch-Cisco-GW online
10.241.174.190
SSI2480506 Switch-Cisco-GW online
10.241.174.158
XK00401 Connectrix-GW online
10.241.174.38
QV060000109 Switch-Brocade-B-GW online
10.241.174.63
AGF0602B00Y Switch-Brocade-B-GW online
10.241.174.60
HK187490033 Symmetrix-GW online
10.243.184.116
HK194900732 Symmetrix-GW online
10.243.112.108
HK190103799 Symmetrix-GW online
10.243.186.178
ESRSGW_10174_130611234926_MSTA-1 CustManageSta-GW
online 10.241.216.230
Figure 55 manage_device --list commmand
13 Device already exists
14 Gateway/Device Client service not running
14 Failed to connect to the Gateway/Device Client
Table 6 manage_device error codes
Error code Description