Installation guide

EMC NetWorker Release 8.1 SP1 Installation Guide 117
Microsoft Windows Installation
14. If the Console server software component was selected previously, the Console server
installation launches. If the Console server component was not selected previously,
proceed to step 19 .
To install the Console server software:
a. On the Welcome to NetWorker Management Console Installation window, and click
Next.
b. On the Customer Information window, fill in the appropriate information, and click
Next.
c. On the Product Setup window, click Next to install the Console server software in
the default directory.
To install the software in a different directory, click Change and specify a new
location.
If the Console server database and configuration files were moved from a different
Console server to this host, specify the location of the database and configuration
files. “For the Console server only, install the Console server software” on page 38
describes how to move the Console server database and configuration files to a
new Console server.

If the Setup wizard detects that there is insufficient disk space to install the
NetWorker software, another dialog box appears listing the local drives, and
highlights the drive with insufficient disk space. The list also displays disk size,
available space, and required space. Use this information to select an appropriate
drive on which to install the software.
15. On the Configuration Options window, type the Database Destination path, the IP port
numbers to use for the embedded HTTP server, and the Client Service port.
When doing this, consider the following:
• To change the default Database Destination path, select Change.
• To use the default port numbers, type 9000 for the HTTP server and 9001 for the
Client Service port.
• To use different port numbers, type the new port numbers (between 1024 and
49151).

Do not use port numbers that are already in use. For example: The Console server
uses port 2638 for TDS protocol communications with the Console database. The
preferred port for EMC Data Protection Advisor product is 9002.
16. Click Next.
17. If the installation process detects an existing Console server database, thn the
Customer Database Maintenance window appears.
In the Customer Database Maintenance window, leave the default option Keep the
database selected and click Next.