Installation guide

lu ci Field cl uster.co n
f At t rib u t e
Descrip t io n
Name name Specifies a name for the file system resource.
Filesystem
Type
fstype If not specified, mo unt tries to determine the file system type.
Mount Point mo untpo i nt Path in file system hierarchy to mount this file system.
Device, FS
Label, or UUID
d evi ce Specifies the device associated with the file system resource.
This can be a block device, file system label, or UUID of a file
system.
Mount Options o pti o ns Mount options; that is, options used when the file system is
mounted. These may be file-system specific. Refer to the
mount(8) man page for supported mount options.
File System ID
(optional)
fsi d
Note
File System ID is used only by NFS services.
When creating a new file system resource, you can leave this
field blank. Leaving the field blank causes a file system ID to be
assigned automatically after you commit the parameter during
configuration. If you need to assign a file system ID explicitly,
specify it in this field.
Force
Unmount
fo rce_unmo u
nt
If enabled, forces the file system to unmount. The default setting
is disabled. Force Unmount kills all processes using the
mount point to free up the mount when it tries to unmount.
Force fsck force_fsck If enabled, causes fsck to be run on the file system before
mounting it. The default setting is disabled.
Enable NFS
daemon and
lockd
workaround
(Red Hat
Enterprise
Linux 6.4 and
later)
nfsrestart If your file system is exported via NFS and occasionally fails to
unmount (either during shutdown or service relocation), setting
this option will drop all file system references prior to the
unmount operation. Setting this option requires that you enable
the Fo rce unmo unt option and must not be used together with
the NFS Server resource. You should set this option as a last
resort only, as this is a hard attempt to unmount a file system.
Use Quick
Status Checks
q ui ck_statu
s
If this option is enabled it will cause the fs. sh agent to bypass
the read and write tests on all status checks and simply do a
mount test.
Reboot Host
Node if
Unmount Fails
sel f_fence If enabled, reboots the node if unmounting this file system fails.
The fi l esystem resource agent accepts a value of 1, yes, o n,
or true to enable this parameter, and a value of 0, no , o ff, or
fal se to disable it. The default setting is disabled.
T ab le B.6 . G FS2 ( cl usterfs Reso u rce)
lu ci Field cl uster.co n
f At t rib u t e
Descrip t io n
Name name The name of the file system resource.
Mount Point mo untpo i nt The path to which the file system resource is mounted.
HA Resource Paramet ers
193