Installation guide

SNMP
Community
co mmunity The SNMP community string.
SNMP Security
Level
snmp_sec_l e
vel
The SNMP security level (noAuthNoPriv, authNoPriv, authPriv).
SNMP
Authentication
Protocol
snmp_auth_p
ro t
The SNMP authentication protocol (MD5, SHA).
SNMP Privacy
Protocol
snmp_pri v_p
ro t
The SNMP privacy protocol (DES, AES).
SNMP privacy
protocol
password
snmp_pri v_p
asswd
The SNMP Privacy Protocol Password.
SNMP Privacy
Protocol Script
snmp_pri v_p
asswd _scri p
t
The script that supplies a password for SNMP privacy protocol.
Using this supersedes the SN MP p rivacy pro t o co l p asswo rd
parameter.
Power Wait
(seconds)
po wer_wai t Number of seconds to wait after issuing a power off or power on
command.
Power Timeout
(seconds)
po wer_timeo
ut
Number of seconds to wait before testing for a status change
after issuing a power on or power on command. The default
value is 20.
Shell Timeout
(seconds)
shell _ti me
o ut
Number of seconds to wait for a command prompt after issuing a
command. The default value is 3.
Login Timeout
(seconds)
l o g i n_ti me
o ut
Number of seconds to wait for a command prompt after login.
The default value is 5.
Times to Retry
Power On
Operation
retry_on Number of attempts to retry a power on operation. The default
value is 1.
Port (Outlet)
Number
po rt Physical plug number or name of virtual machine.
Delay
(optional)
d el ay The number of seconds to wait before fencing is started. The
default value is 0.
lu ci Field cl uster.co n
f At t rib u t e
Descrip t io n
Table A.19, “ IBM iPD U (Red Hat Enterprise Linux 6.4 and later)” lists the fence device parameters
used by fence_i pd u, the fence agent for iPD U over SNMP devices.
T ab le A.19 . IB M iPD U ( Red Hat En t erp rise Lin u x 6 .4 an d lat er)
lu ci Field cl uster.co n
f At t rib u t e
Descrip t io n
Name name A name for the IBM iPD U device connected to the cluster into
which the fence daemon logs via the SNMP protocol.
IP Address or
Hostname
i pad d r The IP address or hostname assigned to the device.
UDP/TCP Port ud ppo rt The UD P/TCP port to use for connection with the device; the
default value is 161.
Login l o g i n The login name used to access the device.
Password passwd The password used to authenticate the connection to the device.
Password
Script
(optional)
passwd _scri
pt
The script that supplies a password for access to the fence
device. Using this supersedes the Passwo rd parameter.
Fence Device Paramet ers
183