Installation guide

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software 47
Field Description
IP Address The IP address assigned to the IPMI port.
Login The login name of a user capable of issuing power on/off
commands to the given IPMI port.
Password The password used to authenticate the connection to the IPMI port.
Table 3-10. Configuring an Intelligent Platform Management Interface (IPMI)
Field Description
Name A name to assign the Manual fencing agent. Refer to
fence_manual(8) for more information.
Table 3-11. Configuring Manual Fencing
Note
Manual fencing is not supported for production environments.
Field Description
Name A name for the McData device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Table 3-12. Configuring a McData Fibre Channel Switch
Field Description
Name A name for the WTI RPS-10 power switch connected to the cluster.
Device The device the switch is connected to on the controlling host (for
example, /dev/ttys2).
Port The switch outlet number.
Table 3-13. Configuring an RPS-10 Power Switch (two-node clusters only)