Installation guide

46 Chapter 3. Installing and Configuring Red Hat Cluster Suite Software
Field Description
Name A name for the GNBD device used to fence the cluster. Note that
the GFS server must be accessed via GNBD for cluster node
fencing support.
Server The hostname of each GNBD to disable. For multiple hostnames,
separate each hostname with a space.
Table 3-6. Configuring a Global Network Block Device (GNBD) fencing agent
Field Description
Name A name for the server with HP iLO support.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Hostname The hostname assigned to the device.
Table 3-7. Configuring an HP Integrated Lights Out (iLO) card
Field Description
Name A name for the IBM Bladecenter device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Table 3-8. Configuring an IBM Blade Center that Supports Telnet
Field Description
Name A name for the RSA device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Table 3-9. Configuring an IBM Remote Supervisor Adapter II (RSA II)