Installation guide

Chapter 3. Installing and Configuring Red Hat Cluster Suite Software 45
Field Description
Name A name for the Brocade device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Table 3-2. Configuring a Brocade Fibre Channel Switch
Field Description
IP Address The IP address assigned to the PAP console.
Login The login name used to access the PAP console.
Password The password used to authenticate the connection to the PAP
console.
Table 3-3. Configuring a Bull Platform Administration Processor (PAP) Inter-
face
Field Description
Name The name assigned to the DRAC.
IP Address The IP address assigned to the DRAC.
Login The login name used to access the DRAC.
Password The password used to authenticate the connection to the DRAC.
Table 3-4. Configuring a Dell Remote Access Controller/Modular Chassis
(DRAC/MC) Interface
Field Description
Name A name for the BladeFrame device connected to the cluster.
CServer The hostname (and optionally the username in the form of
username@hostname) assigned to the device. Refer to the
fence_egenera(8) man page.
Table 3-5. Configuring an Egenera BladeFrame