Installation guide

44 Chapter 3. Installing and Conﬁguring Red Hat Cluster Suite Software

To conﬁgure fence devices, follow these steps:

1. Click Fence Devices. At the bottom of the right frame (labeled Properties), click

the Add a Fence Device button. Clicking Add a Fence Device causes the Fence

Device Conﬁguration dialog box to be displayed (refer to Figure 3-6).

Figure 3-6. Fence Device Conﬁguration

2. At the Fence Device Conﬁguration dialog box, click the drop-down box under Add

a New Fence Device and select the type of fence device to conﬁgure.

3. Specify the information in the Fence Device Conﬁguration dialog box according to

the type of fence device. Refer to the following tables for more information.

Field Description

Name A name for the APC device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Table 3-1. Conﬁguring an APC Fence Device