Installation guide

6 Chapter 1. Red Hat Cluster Manager Overview
Software
Subsystem
Components Description
fence_bullpap Fence agent for Bull Novascale
Platform Administration Processor
(PAP) Interface.
fence_drac Fence agent for Dell Remote
Access Controller/Modular Chassis
(DRAC/MC).
fence_egenera Fence agent used with Egenera
BladeFrame system.
fence_gnbd Fence agent used with GNBD
storage.
fence_ilo Fence agent for HP ILO interfaces
(formerly fence_rib).
fence_ipmilan Fence agent for Intelligent Platform
Management Interface (IPMI).
fence_manual Fence agent for manual interaction.
Note: Manual fencing is not
supported for production
environments.
fence_mcdata Fence agent for McData Fibre
Channel switch.
fence_node Command used by lock_gulmd
when a fence operation is required.
This command takes the name of a
node and fences it based on the
node’s fencing configuration.
fence_rps10 Fence agent for WTI Remote
Power Switch, Model RPS-10
(Only used with two-node
clusters).
fence_rsa Fence agent for IBM Remote
Supervisor Adapter II (RSA II).
fence_sanbox2 Fence agent for SANBox2 Fibre
Channel switch.
fence_vixel Fence agent for Vixel Fibre
Channel switch.