Installation guide

Appendix B. Selectively Installing Red Hat Cluster Suite Packages 149
2. Run up2date --installall --channel Label for Red Hat Cluster Suite. The
following example shows running the command for i386 RPMs:
# up2date --installall --channel rhel-i386-as-4-cluster
3. (Optional) If you are installing Red Hat GFS, run up2date --installall
--channel Label for Red Hat GFS. The following example shows running the
command for i386 RPMs:
# up2date --installall --channel rhel-i386-as-4-gfs-6.1
B.1.2. Custom RPM Installation
Custom RPM installation consists of the following steps:
1. Determine which RPMs to install. For information on determining which RPMs to
install, refer to Section B.1.2.1 Determining RPMs To Install.
2. Install the RPMs using the rpm utility. For information about installing the RPMs us-
ing the rpm utility, refer to Section B.1.2.2 Installing Packages with the rpm Utility.
Note
If you are installing the GFS RPMs, you must install Red Hat Cluster Suite before Red
Hat GFS.
B.1.2.1. Determining RPMs To Install
Determining which RPMs to install is based on the following criteria:
• The lock manager Red Hat Cluster Suite is using — either DLM or GULM
• The Red Hat Cluster Suite and Red Hat GFS functions you are using (besides the stan-
dard functions)
• Whether to include development libraries
• The type of kernel (or kernels) is installed
Use the following tables for determining which RPMs to install:
• Table B-1 — For Red Hat Cluster Suite with DLM
• Table B-2 — For Red Hat Cluster Suite with GULM