Installation guide

Fig u re 4 .2. St o rag e Fen cin g Examp le
Specifying a fencing method consists of editing a cluster configuration file to assign a fencing-
method name, the fencing agent, and the fencing device for each node in the cluster.
The way in which a fencing method is specified depends on if a node has either dual power supplies
or multiple paths to storage. If a node has dual power supplies, then the fencing method for the node
must specify at least two fencing devices — one fencing device for each power supply (refer to
Figure 4.3, “ Fencing a Node with Dual Power Supplies” ). Similarly, if a node has multiple paths to
Fibre Channel storage, then the fencing method for the node must specify one fencing device for
each path to Fibre Channel storage. For example, if a node has two paths to Fibre Channel storage,
the fencing method should specify two fencing devices — one for each path to Fibre Channel storage
(refer to Figure 4.4, “ Fencing a Node with Dual Fibre Channel Connections” ).
⁠Chapt er 4 . Fencing
23