User guide

DataDirect Networks SFA™ OS 1.5.3.0 Release Notes Revision B | 6
Issue 'SHOW ENCLOSURE <x> ALL' to identify your current BMC version. For
example, see Figure 2.
$ show enclosure 0 all
************************
* Enclosure(s) *
************************
Index: 0
Enclosure: 0x50000000
Type: CONTROLLER
Logical ID: 0x0001ff0900160000
Vendor ID: DDN
Product ID: SFA12000
Revision: 0000
Is Responsive: TRUE
Fault Status: OK
Child Fault Status: NON-CRITICAL
Zones: 0
Zoning Configuration: 0
Position: NOT APPLICABLE
Fault Indicator: OFF
Predicted Failure Ind: OFF
Locate Indicator: OFF
Baseboard part number: X9DRX+-F-DD007
Baseboard serial number:WM21S31110
Baseboard date: 19960101
BIOS version: 21.0k
BMC version: 21.61
Firmware version: 1.5.1.2
Total Enclosures: 1
Figure 2
2.4.2 S2A6620
SFA OS 1.5.3.0 has a feature that will automatically upgrade the hardware revision of the
Li-Ion fuel battery pack to revision C. If the hardware revision and/or the firware revision
is below C, then the automatic update will upgrade both to revision C.
The automatic update will take as long as 10 minutes. During that time, the SFA6620
controller will be responsive and will indicate the progress of the upgrade in the logs.
WARNING: Do NOT interrupt this upgrade process; doing so could damage the
controller.
Figure 3 is an example of SHOW UPS ALL showing how to locate the Hardware Revision
of the Li-Ion battery pack.
Show ups all
******************
* UPS(s) *
******************
Sub Index: 1
Sub OID: 0x80000001
.
.
.
Serial number: 0089
Hardware revision: C
Firmware version: C
Battery Long Term Storage Preparation: NO
Battery Long Term Storage Ready: YES
Long Term Storage Ready ETA: NOT AVAILABLE
Battery Op. State: UNKNOWN:10
Figure 3