User guide

DataDirect Networks SFA™ OS 2.0.0 Release Notes Revision A1 | 4
1.0 Overview
This document applies to the SFA OS version 2.0.0.3-17400 release for DataDirect Networks’
SFA12K-40, SFA12K-20, SFA12K-20E, SFA10K-X, and SFA7700 storage systems. It details
upgrade procedures, enhancements, resolved issues, known issues with workarounds, and
recommended practices associated with SFA OS 2.0.0.
“SFA10K” represents SFA10K-X and SFA10K-M.
“SFA12K” represents SFA12K-40, SFA12K-20, and SFA12K-20E.
2.0 Installation
2.1 Overview
SFA OS version 2.0.0 is a new feature release for all supported systems.
2.2 Recommended Code Level Requirements
The recommended controller code levels are shown below.
SFA OS
Products
BIOS BMC CONFIG FPGA
SFA7700
23_001
21.86
n/a
001.009-000.035
SFA10K
GEMDV250 DDGEN050 JANUSC23 n/a
SFA12K
21.0L
21.67
n/a
n/a
2.3 Procedure to Request Firmware
To request the new firmware, contact DDN by sending an email to [e-mail] and
include the following information:
Name:
Title:
Company:
Address:
Phone:
Email:
System Type:
System Serial Number:
Firmware Upgrade Requested:
A response will be sent to the provided email with instructions on downloading the requested
firmware.