Installation guide

Assume dead after (seconds)

If the primary LVS node does not respond after this number of seconds, then the backup

LVS router node will initiate failover.

Heartbeat runs on port

This field sets the port at which the heartbeat communicates with the primary LVS node.

The default is set to 539 if this field is left blank.

Warning

Remember to click the ACCEPT button after making any changes in this panel to

make sure you do not lose any changes when selecting a new panel.

6. VIRTUAL SERVERS

The VIRTUAL SERVERS panel displays information for each currently defined virtual server.

Each table entry shows the status of the virtual server, the server name, the virtual IP assigned

to the server, the netmask of the virtual IP, the port number to which the service communicates,

the protocol used, and the virtual device interface.

Chapter 4. Configuring the LVS Routers with Piranha Configuration Tool