Installation guide

Tip

You should alias the NAT floating IP address to the Ethernet interface connected

to the private network. In this example, the private network is on the eth1

interface, so eth1:1 is the floating IP address.

Warning

After completing this page, click the ACCEPT button to make sure you do not

lose any changes when selecting a new panel.

5. REDUNDANCY

The REDUNDANCY panel allows you to configure of the backup LVS router node and set

various heartbeat monitoring options.

Tip

The first time you visit this screen, it displays an "inactive" Backup status and an

ENABLE button. To configure the backup LVS router, click on the ENABLE

button so that the screen matches Figure 4.4, “The REDUNDANCY Panel”.

Chapter 4. Configuring the LVS Routers with Piranha Configuration Tool