Specification

Thomas and Betts Corporation
Product Guide Specification
AREA LIGHTING
26 56 23-2
REVISION 0
PART 2 – PRODUCTS
2.01 GENERAL
A. Lampholders, garden lights and accessories shall consist of the following constructions:
1. Hooded lampholders: WH90 series
2. Universal lampholders: WHG-1 series
3. Lampholder assembly (2 lampholders & round cover): WHY2 catalog number
4. Heat resistant sealing gasket for lampholders: G1 catalog number
5. Y adapter, one-to-two outlets: AD11-2 catalog number
6. Round lampholder covers: S-1-RD series
7. Jumbo lampholder covers: SJ-11 series
8. Single gang lampholder covers: LC-11 series
9. Standard die cast lampholders: L-80 series
10. Decorative floodlight: 2L80D2 series
11. Spike lights: WLS-10 catalog number
12. Portable spotlights: K702 series
B. Lampholders and garden lights shall be UL listed.
2.02 MANUFACTURERS
A. Acceptable Manufacturers:
Thomas & Betts Corporation
8155 T&B Blvd
Memphis, TN 38125
800-816-7809, 901-252-5000
www.tnb.com
Product: Red-Dot® Lighting
2.03 DESIGN AND PERFORMANCE REQUIREMENTS
A. Lampholders, garden lights and accessories shall be listed for use in wet locations in accordance to
the NEC.
B. Lampholders, garden lights and accessories shall be made from a die cast alloy with powder coated
finish.
C. Lampholders and garden lights shall handle maximum lamp wattages of 150W.
PART 3 – EXECUTION
3.01 INSTALLATION
A. Installation shall be in accordance with the NEC where applicable and manufacturer’s instructions.
END OF SECTION