Specification

Thomas and Betts Corporation
Product Guide Specification
AREA LIGHTING
26 56 23-1
REVISION 0
Specifier Notes: This product guide specification is written according to the Construction Specifications Institute
(CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project
Resource Manual—CSI Manual of Practice, Fifth Edition.
This section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the
project and local building code. Coordinate this section with other specification sections and the Drawings. Delete
all “Specifier Notes” after editing this section.
Section numbers are from MasterFormat 2010 Update.
SECTION 26 56 23
AREA LIGHTING
Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required or relevant for the project.
PART 1 – GENERAL
1.01 SUMMARY
A. This section includes lampholders, garden lights and accessories for use in wet locations.
1.02 REFERENCES
A. Underwriters Laboratories, Inc. (UL):
1. UL1598 Luminaires
B. National Fire Protection Association (NFPA)
1. NFPA 70 National Electrical Code (NEC)
1.03 SUBMITTALS
A. Comply with Section 01 33 00 – Submittal Procedures.
B. Product Data:
1. Submit manufacturer’s descriptive literature and product specifications for each product.
2. Manufacturer’s product drawings.
1.04 QUALITY ASSURANCE
A. Manufacturer Qualifications: Products shall be free of defects in material and workmanship.
B. Furnished products are recognized, listed or classified by third party agencies as suitable for the
intended purpose.
1.05 WARRANTY
A. Product is warranted free of defects in material and workmanship.
B. Product is warranted to perform the intended function within design limits.