User guide

DEEP DRAGON Setup Page 9
3: DEEP DRAGON Setup
DEEP DRAGON requires complete and thorough setup prior to use.
DEEP DRAGON Housing Preparation
 Port. Remove the Port by rotating 90 degrees either direction. Gently pull the Port
away from the Port Extender.
 TIP: Liberal lubrication of the Port o-ring allows easy rotation during
installation/removal.
Port Extender. Remove the Port Extender by removing 4 screws around the perimeter.
Rotate the port 90 degrees either
direction, then gently pull forward to
remove.
Note: DEEP RED shown
Remove 4 screws securing the port extender and remove.
Pull the Port Extender forward until it clears the gear drive
mechanisms.
Note: DEEP RED shown