User guide

Introducing DEEP DRAGON Page 6
Unpacking DEEP DRAGON
After you remove DEEP DRAGON from its shipping container, carefully inspect it for
missing parts or damage that may have occurred during shipment. If you discover any
discrepancies, contact Gates or your dealer immediately for assistance.
Standard Parts
 DEEP DRAGON Housing
 Camera Mount
 Lens Gear Drives (2x upper and
1x lower)
 Monitor Shell
* 5.6” LCD Monitor Shell or
* 5” RED PRO Monitor Shell
 Hard Sided Rolling Case x 2
 Seal Check system
 Tool Kit with case
 Various assembly and spare
parts for DEEP DRAGON
including bolts, set screws and
o-rings.
 Spare O-Ring Kit
 Carry Handle
 Trim Weights (quantity
dependent on configuration)
Optional Parts
* = necessary for operation
 Port Extender(s) of choice for
your lens*
 Port(s) of choice (Dome, either
glass or acrylic, or Flat) and
shade*
 Port Mask (as applicable for
specific lenses)
 Focus / Iris Indicator Rings
 Guide Bars and acetyl drive
shafts for your lens of choice*
 Microphone or Hydrophone
 Water alarm
 HD-SDI surface feed bulkhead connector and cable
 Light System