User guide

DEEP DRAGON Operation Page 54

 Verify Operation. Install a Lens Gear Drive to mate with the Gear Adapter as

shown in the image below. Verify smooth operation with no interferences.

If you have the Dragon fan

installed, the gear teeth of the

Optitek mount may interfere. If

so, you will need to make

clearance in this region by

grinding or milling away the

teeth as shown in this image.

Gates can perform this task,

Relocate the

Locking tab as

shown, which

is midway

between the

locked and

unlocked

position.

The Optitek ProLock is shown in

rotated to the counterclockwise

stop, and the lens lock ring in the

unlocked position.

Position the

locking

thumbscrew

here.