User guide

DEEP DRAGON Setup Page 29
RED PRO 5 in External Monitor
 Open the case. Remove the 3 screws that secure the back to the monitor shell.
Clean the window / LCD. If necessary, clean the inside of the window and blow
out any foreign matter. Clean the LCD screen as well.
 Connector. Plug in the LCD connector. Be sure it is fully seated to the LCD.
 Install the LCD. The RED LCD will insert face down (against the window) with the
connector facing the rear. Insert the left edge first as shown in photo. It should rest
inside the shell without obstruction.
Remove 3 screws to
open the LCD
Monitor shell.
Insert the RED PRO monitor at an angle
as shown, then plug in the LCD
connector.