User guide

DEEP DRAGON Setup Page 24

REDMOTE Controller Installation

The RDCC REDmote™ is installed in the rear shell of DEEP DRAGON. The following

photos show the REDMOTE Controller as separated from the housing. This is for

illustration purposes only – do not remove the entire REDMOTE Controller from

the housing.

 Remove REDMOTE Cradle. The REDMOTE Cradle is secured only by magnets.

Pull the cradle away from the REDMOTE Controller to separate.

 Install REDmote™. Insert the REDmote™ at an angle as shown in the photo. It

will fully seat into the cradle. Secure with the small thumbscrew.

REDMOTE Controller Parts:

 REDMOTE Controller Panel (shown

removed from the housing

 REDMOTE Cradle;

 Mount Screw;

 RDCC REDmote™ (not included)

Insert the REDmote™

into the Cradle at an

angle. REDmote™ will

‘snap’ into place when

full

seated.

Secure with

thumbscrew.