User guide

DEEP DRAGON Setup Page 18
 Plug in the optional Submersible Mic, Hydrophone, or Comm input to Mic-1 or Mic-2
locations on the EPIC camera.
 AUDIO CONNECTIONS. Failure to connect the Audio connectors may interfere
with the camera fan, and overheating will result.
 Fully insert and secure the camera. Slide the assembly forward until it stops
firmly under the thumbscrews. If there is obstruction, inspect for the reason. A
thumbscrew or cable are likely the obstruction.
 Tighten thumbscrews. Three thumbscrews secure the EPIC camera to the
housing. Tighten by hand, and if desired use the 3/16 hex tool to tighten firmly (this
is usually not necessary).
 SYNC / CTRL Connections. Plug in the SYNC and CTRL connectors to the
corresponding ports on the camera. These are clearly marked as shown in the
photos.
 CAUTION: SYNC / CTRL CONNECTIONS. Failure to properly connect the SYNC /
CTRL connections may damage your EPIC / Scarlet camera.
 Other Connections. Plug in HD-SDI (optional) if installed.
Place the audio connections.