User guide

DEEP DRAGON Setup Page 16
Camera / Lens Installation
 Camera Mount Installation. The Camera Mount is secured to the EPIC camera by
two mounting screws on the bottom.
Locate the two screws to the mating 3/8-16 threaded holes on the camera. Thread
by finger tight first, then finish with a coin or wide-bladed screwdriver. Tighten
firmly.
 Plug in the Power cable.
Remove the connector caps
and plug in the power cable to
the EPIC camera.
 Place camera to housing.
Place the Camera / Camera
Mount assembly onto the
Secure EPIC to Camera Mount with two
mounting screws. Tighten firmly.
Plug in the power cable to the camera.
Place the Camera / Camera
Mount assembly in the
housing.