Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 54

 Center: The center crosshair.

 Grid: Rule-of-thirds grid.

 Shading: The shaded region outside of the area of interest.

TEST SIGNALS

Permits the video monitor outputs to be replaced with one of the following video test patterns:

 Chip Chart

 SMPTE Bars

 LUMA RAMP

To enable a test signal, select the test signal box. To exit the test signal, tap the touchscreen once or press the

Enter or Menu button on the SIDE HANDLE or REDMOTE.

You can also enable an Audio Tone while a test pattern is active.

NOTE: RED DSMC test signals are not recordable; they are provided to help align external video monitors con-

nected via the HD-SDI or HDMI outputs.

LOOK

The Look menu permits adjustment of Color, Gain, FLUT

, Curves, Color/Gamma, and Color Temperature meta-

data values. These parameters will affect the look of the monitor path, but do not affect the actual REDCODE

RAW data being recorded.

Chip Chart

SMPTE Bars with Pluge Pulse

Luma Ramp