Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 29

QUICKPLATE MODULE CONNECTORS

The QUICKPLATE MODULE has two industry-standard 0B 2-pin auxiliary ports to keep your third-party acces-

sories powered when shooting.

The two auxiliary connectors provide a maximum combined output of 3.8 A. For example, if you’re pulling 2.0

A out of one port, you can pull up to 1.8 A out of the other port.

When connecting a cable to an auxiliary connector, align the key and red mark on the auxiliary connector with

the corresponding key on the cable connector.

PIN DESCRIPTION

1 Ground

2 +12VDC

INSTALL QUICKPLATE MODULE

The QUICKPLATE MODULE attaches to the DSMC brain the same way that the other DSMC modules attach.

For more information about how to install DSMC modules, go to “Install Modules” on page 18.

Auxiliary Connectors

QUICKPLATE MODULE

Installed