Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 28

INSTALL BATTERIES IN QUAD BATTERY MODULE

Insert one REDVOLT or REDVOLT XL battery into each desired location and press until you hear a click and the

battery is seated.

REMOVE BATTERIES FROM QUAD BATTERY MODULE

1. Press the black rectangular battery eject button next to the battery that you want to eject.

2. When the battery pops out, remove the battery from the QUAD BATTERY MODULE.

QUICKPLATE MODULE

The QUICKPLATE MODULE attaches to a +1 ADAPTOR MODULE or MODULE ADAPTOR to provide RED BRICK

power to your DSMC. Unlike the BACKPACK QUICKPLATE and BACKPACK QUICKPLATE (SHORT), this prod-

uct does not require the use of a lemo cable or BACKPACK BASEPLATE. This allows you to mount your RED

BRICK onto the back of your camera brain and plug in DC power to keep camera on when switching batteries.

Eject Battery

QUICKPLATE MODULE

Front (left), and Rear

(right)