Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 27

QUAD BATTERY MODULE: REDVOLT AND REDVOLT XL

The optional QUAD BATTERY MODULE accepts up to four REDVOLT or up to two REDVOLT XL batteries, which

can power the camera and typical accessories.

When multiple batteries are installed in the QUAD BATTERY MODULE, the power management circuit will select

the lowest charged battery to supply power to the camera. When the current battery reaches 4% charge, the

battery module automatically selects the next lowest charged battery to supply power to the camera.

QUAD BATTERY MODULE LEDS

Each battery compartment of the QUAD BATTERY MODULE has an LED above the battery eject button that

shows the status of the corresponding battery. The table below describes what each LED color/blinking mode

means.

COLOR/BLINKING DESCRIPTION

Off No battery

Green Battery is charged, but is not in use

Green blinking Battery in use

Yellow blinking Battery has 10 minutes of run time remaining

Red blinking Battery has 5 minutes of run time remaining

Red Battery Discharged

Yellow blinking Accessing media (for example, when formatting)

QUAD BATTERY MODULE

REDVOLT XL (left), REDVOLT

(right)