Specifications

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-A | 20

1. Insert the lip at the top of the module into the recess at the top of the MODULE ADAPTOR.

2. Rotate the module down flush with the rear of the MODULE ADAPTOR.

3. While applying steady pressure to hold the module against the MODULE ADAPTOR, use a T20 Torx driver

to rotate the lock on the MODULE ADAPTOR clockwise to the Lock position in order to secure the module.

REMOVE DSMC MODULE AND ADAPTOR PLATE

REQUIRED TOOL: T20 Torx

driver

1. Power down the camera.

2. Use a T20 Torx driver to rotate the lock on the MODULE ADAPTOR counterclockwise to the Unlock position.

3. Rotate the module upwards and down to disengage the lip at the top of the module from the MODULE

ADAPTOR.

Insert Module Lip

Press Module Flush