MSDS

_____________________________________________________________________________________________
RD-02000CC - Color Cure Caulk – Pink to White – Plasticizer-Free –
Solvent-Free
Revision Date 29-May-2013
Incompatible Materials
Strong acids.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Calcium Carbonate
1317-65-3
- TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable fraction
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Titanium dioxide
13463-67-7
TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust
(vacated) TWA: 10 mg/m
3
total
dust
IDLH: 5000 mg/m
3
Appropriate Engineering Controls
Engineering Controls
Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual Protection Measures, such as Personal Protective Equipment
Eye/Face Protection
Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection
Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection
If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State
Smooth paste
Appearance
Pink to white paste; Applies Pink –
Dries White when ready to paint
Odor
Mild acrylic
Color
Applies Pink – Dries White when ready
to paint
Odor Threshold
Not determined
Property Note: The information below is not
intended for use in preparing
product specifications
Remarks • Method
pH
_____________________________________________________________________________________________
7.0-10.0
Melting Point/Freezing Point
< 0 °C / <32 °F
Page 4 / 8
Boiling Point/Boiling Range
Not established