SDS

Page 4 / 8
RD-0020 - Acrylic Create A Color® Sealant
Revision Date 01-Oct-2017
9. PHYSICAL AND CHEMICAL PROPERTIES
Exposure Guidelines Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Petroleum Hydrocarbon
64742-48-9
ACGIH TWA: 5 mg/m
3
; ACGIH
STEL: 10 mg/m
3
-
-
Appropriate Engineering Controls
Engineering Controls Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual Protection Measures, such as Personal Protective Equipment
Eye/Face Protection Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.
General Hygiene Considerations Handle in accordance with good industrial hygiene and safety practice.
Information on Basic Physical and Chemical Properties
Physical State Smooth paste
Appearance White in cartridge, paste. Custom color Odor Mild acrylic,
matched after mixed, applied & 24 hrs
curing
Color White prior to mixing; after mixing &
application, bead dries to an exact
color match within 24 hrs
Odor Threshold Not determined
Property Note: The information below is not
intended for use in preparing
product specifications
pH ~8.5-9.5
Melting Point/Freezing Point < 0 °C / <32 °F
Boiling Point/Boiling Range ~98.88-104.44 °C / ~210-220 °F
Flash Point > 93.33 °C / > 200 °F
Evaporation Rate Not determined
Flammability (Solid, Gas) Not determined
Upper Flammability Limits Unknown
Lower Flammability Limit Unknown
Vapor Pressure Not established
Vapor Density Heavier than air
Remarks • Method
Specific Gravity ~1.0-1.10 @ 25 °C (77 °F)
Water Solubility Soluble in water
Solubility in Other Solvents Not determined