SDS

Page 4 / 8
RD-0200.3000.0997 - Advanced Kitchen & Bath Sealant - Clear
Revision Date: 04-Jul-2013
Incompatible Materials Strong bases, Strong oxidizing agents.
Exposure Guidelines Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Crystalline silica
14808-60-7
TWA: 0.025 mg/m
3
respirable
fraction
(vacated) TWA: 0.1 mg/m
3
respirable dust
: (30)/(%SiO2 + 2) mg/m
3
TWA
total dust
: (250)/(%SiO2 + 5) mppcf TWA
respirable fraction
: (10)/(%SiO2 + 2) mg/m
3
TWA
respirable fraction
IDLH: 50 mg/m
3
respirable dust
TWA: 0.05 mg/m
3
respirable
dust
Appropriate engineering controls
Engineering Controls Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual protection measures, such as personal protective equipment
Eye/Face Protection Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection In event of insufficient ventilation, suitable respirator should be used. NIOSH-approved air
purifying respirator w/ organic vapor canister may be necessary under circumstances of
airborne concentrations exceeding exposure limits. Respirator program meeting OSHA
1910.134 & ANSI Z88.2 requirements should be followed when workplace conditions
warrant respirator use.
General Hygiene Considerations Wash hands before breaks and immediately after handling the product. Wash contaminated
clothing before reuse.
Precautionary Measures: Contact lenses may pose a hazard. Soft lenses may absorb & all
lenses may concentrate irritants.
Information on basic physical and chemical properties
Physical State
Paste
Appearance
Clear paste
Odor
Slight
Color
Clear
Odor Threshold
Not determined
Property Note: The information below is not Remarks • Method
intended for use in preparing
product specifications
pH Not applicable
Melting Point/Freezing Point < 0 °C / <32 °F
Boiling Point/Boiling Range Not applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
8. EXPOSURE CONTROLS/PERSONAL PROTECTION