SDS

Page 5 / 9
RD-0200.3000.0990 - Advanced Gutter & Flashing Sealant - White
Revision Date: 21-Jul-2013
Physical State
Paste
Appearance
White paste
Odor
Slight
Color
White
Odor Threshold
Not determined
Property Note: The information below is not Remarks • Method
intended for use in preparing
product specifications
pH Not applicable
Melting Point/Freezing Point < 0 °C / <32 °F
Boiling Point/Boiling Range Not applicable
Flash Point > 93.33 °C / > 200 °F CC (closed cup)
Evaporation Rate Slower than n-Butyl Acetate
Flammability (Solid, Gas) Not determined
Upper Flammability Limits Not established
Lower Flammability Limit Not established
Vapor Pressure Not established
Vapor Density Heavier than air
Specific Gravity 1.25-1.75 @ 25 °C (77 °F)
Water Solubility Not Established
Solubility in other solvents Not determined
Partition Coefficient Not determined
Autoignition Temperature Not established
Decomposition Temperature Not determined
Kinematic Viscosity Not determined
Dynamic Viscosity Not determined
Explosive Properties Not determined
Oxidizing Properties Not determined
Additional Information % by Weight Solids (TNV): > 90%
VOC Content (%) < 2%
VOC Content <35 g/L
Reactivity
Cures upon contact with air.
Chemical Stability
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Hazardous Polymerization Hazardous polymerization does not occur.
Conditions to Avoid
Incompatible Materials. Excessive heat or cold.
Incompatible Materials
Strong bases, Strong oxidizing agents.
Hazardous Decomposition Products
No hazardous decomposition products if stored & handled as prescribed.
Information on likely routes of exposure
Product Information
11. TOXICOLOGICAL INFORMATION
10. STABILITY AND REACTIVITY