SDS

Page 2 / 9
RD-0200.3000.0990 - Advanced Gutter & Flashing Sealant - White
Revision Date: 21-Jul-2013
Chemical Name
CAS No
Weight-%
Calcium Carbonate
471-34-1
<50
Diisodecyl phthalate
26761-40-0
<30
Vinyltrimethoxysilane
2768-02-7
<3
Titanium dioxide
13463-67-7
<10
Non-hazardous Ingredients*
Proprietary
<30
Crystalline silica
14808-60-7
<1
* Unlisted ingredients are not considered hazardous under the OSHA Hazard Communication Standard (29 CFR 1910.1200).
(Calcium Carbonate, Titanium Dioxide) Inhalation of particulates unlikely due to product’s physical state. Crystalline Silica (as
Quartz) present @ low levels in Calcium Carbonate filler.
First Aid Measures
General Advice Provide this SDS to medical personnel for treatment.
Eye Contact Immediately flush with plenty of water. After initial flushing, remove any contact lenses and
continue flushing for at least 15 minutes. Seek immediate medical attention/advice.
Skin Contact In case of contact, immediately wash skin with soap and water or water for at least 15
minutes. Remove and wash contaminated clothing before reuse. If irritation persists, seek
medical attention.
Inhalation Remove to fresh air. If breathing is difficult, leave area to obtain fresh air. If breathing
remains difficult, get medical attention.
Ingestion If swallowed, do not induce vomiting. Get medical attention immediately.
Most important symptoms and effects
Symptoms Prolonged or repeated skin contact may result in dermatitis (red, dry skin). Direct contact
with eyes may cause temporary irritation. Exposed individuals may experience eye tearing,
redness and discomfort. Irritating to mouth, throat, and stomach if ingested. May cause
gastrointestinal irritation, nausea, diarrhea, and vomiting. Overexposure to vapors during
application and curing may mildly irritate respiratory tract and result in coughing and
sneezing.
Indication of any immediate medical attention and special treatment needed
Notes to Physician Provide general supportive measures and treat symptomatically. May aggravate
pre-existing skin disorders.
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Small Fire Use carbon dioxide (CO2), dry chemical or water spray.
Large Fire Dry chemical, Use foam or water spray.
5. FIRE-FIGHTING MEASURES
4. FIRST-AID MEASURES
3. COMPOSITION/INFORMATION ON INGREDIENTS