Technical Specifications

1
Technical Data Sheet RED DEVIL, INC.
Product: RD 100% Silicone Sealant – Architectural Grade - Acetoxy
Product No.: #0810, 0816, 0816/20, 0816/40, 0816/50, 0816/60, 0820, 0826
Description: A premium quality, high modulus, 100% silicone sealant with excellent working properties. This product
forms strong, flexible, durable, weather-resistant seals for joints, by providing excellent adhesion to most non-porous
surfaces. This product is recognized by USDA (except 0816/40) & by UL. It also conforms to FDA Requirements. NOT
PAINTABLE. Not recommended for application in totally confined areas as atmospheric moisture is required for sealant
cure. Sealant does not adhere well to Teflon coated materials, polyethylene, polypropylene or methylmethacrylate
(plexiglas). Not for use on or near sensitive metals such as copper, brass, zinc, carbon steel, galvanized iron or
magnesium as corrosion may occur during sealants acetic acid release/cure.
Performance Specifications: Meets or exceeds requirements of the following specs:
TT-S-00230C Class A, CEBTP 432.6 140-2, Mil Spec 46106A, CGSB 19C9-9B,
DIN 18540, Part 2, TT-S-001543A, OREX 150031-2, ASTM C920 Class 25, FDA No.21
CFR 177.2600 (This product is appropriate for incidental food contact in federally
Inspected meat & poultry plants. Conforms to Food & Drug Administration requirements.
Underwriters Laboratories Recognized Component.
Typical Properties:
Joint Movement Capability +/- 25%
Weight per gallon 8.50 +/- 0.50 lbs.
% Solids (TNV) 99 ± .5
Toxicity (TT-S-1543A) Non-toxic when used as directed.
Shore A Hardness (D-2240) 22 +/- 2
Color White, Almond, DK. Brown, Gray, Black, Clear
Odor Acetic Acid
Weight Loss (TT-S-001543A) 5% Maximum
Application Temperature Range 10 F to 100 F
Service Temperature Range -60 F to 400 F (Intermittent to 500 F) (when fully cured)
Tack-free Time (TT-S-1543A) Less than 1 Hour
Full Cure 24 Hrs
Flash Point Greater than 200°F (94°C)
Durability (TT-S-1543A) Complies
Freeze/Thaw Stability Passes 5 cycles
Stain Resistance (TT-S-1543A) No Color Change
Slump Resistance (D-2202) Excellent
Water Resistance Excellent
Crack Resistance Excellent
Chemical Resistance Excellent
Weatherability Excellent @ 10,000 hrs. in Q.U.V. weather tester
Peel Strength-Glass (TT-S-001543A, 3.5.9) 45 ppi +/- 1
Peel Strength-Concrete (TT-S-001543A, 3.5.9) 40 ppi +/- 1
% Elongation @ Break (D-412) 500% +/- 25%
Tensile Strength @ Break (D-412) 350 psi
Tear Strength (D-624, Die B) 30 ppi
Coverage 50 - 55 linear feet (3/16" bead)
Clean-up Solvent (before cure) Mineral Spirits
Shelf Life 1 year unopened @ 77°F (25°C)
Storage Store in a cool, dry area. Avoid temperatures in excess of 100°F .
Standard Container HDPE Cartridge, Metal Squeeze Tubes
Dielectric Strength (D-887/D-149) 22 KV/MM
Dielectric Constant (D-924/D-150 @ 1 MHZ ) 2.7
Dissipation Factor (D-924/D-150 @ 1 MHZ) 0.002
Volume Resistivity (X CM) 2 X 10 15th
VOC: 3.1%/wt.
CARB Compliance: YES
Prop 65 Ingredients: NONE
PROPER SHIPPING NAME: N/A