SDS

Red Devil, Inc. • 4175 Webb Street • Pryor, OK 74361 • Phone: [phone] • Technical Service: [phone] • Fax: [phone]
Website: www.reddevil.com Page 2 of 2
Clean Up
Wipe excess with dry towel or paper towel prior to cure.
Wash skin with mild soap & water. Clean tools with
mineral spirits prior to cure. Cured sealant may be
removed using a razor blade taking care not to undercut
seal to substrate.
For Best Results
• Complete all painting prior to sealant application.
• Avoid applications of total confinement as sealant
cures through contact with atmospheric moisture.
• Complete tooling of applied bead within 5 to 10
minutes.
• If masking tape is used to assure a straight edge bead
it must be removed prior to formation of tack free skin
(typically 10 to 20 minutes).
• Use with adequate ventilation as sealant gives off
acetic acid (vinegar-like odor) during application & cure.
(No odor present following complete cure)
Color
Clear (Translucent), White, Almond, Dark Brown, Gray,
Black
Packaging
10.1 oz. HDPE Cartridge (0816/0826 Series), 2.8 oz.
metal squeeze tube (0810 Series)
Limitations
• Sealant not paintable. Complete all painting prior
to sealant application.
• Not recommended for full-time water immersion
applications.
• Not recommended for application in totally
confined areas as atmospheric moisture is
required for sealant cure.
• Sealant does not adhere well to Teflon coated
materials, Polyethylene, Polypropylene or
Methylmethacrylate (Plexiglas). Not recommended
for use on Polycarbonate.
• Not for use on or near sensitive metals such as
Copper, Brass, Zinc, Carbon Steel, Galvanized
Iron or Magnesium as corrosion may occur during
sealant’s acetic acid release.
Environmental, Safety & Transportation Information
Criteria
CARB Compliance
Prop 65 Ingredients
DOT Proper Shipping Name
DOT Hazard
DOT UN/NA Number
Packing Group
VOC Content
Evaluation Method
Documents Review
Documents Review
Review of Regs
Review of Regs
Review of Regs
Review of Regs
Calculated
Status
Yes
None
Not Regulated by DOT
N/A
N/A
N/A
< 3%/wt, < 40 g/L
CAUTION: NOT FOR INTERNAL CONSUMPTION. KEEP OUT OF REACH OF CHILDREN
& PETS. KEEP FROM FREEZING. DIRECT CONTACT WITH UNCURED SEALANT
IRRITATES EYES & MAY IRRITATE SKIN. SEVERITY INCREASES WITH PROLONGED
CONTACT. OVEREXPOSURE TO VAPOR MAY IRRITATE EYES, NOSE & THROAT.
AVOID BREATHING OF VAPOR. PROVIDE ADEQUATE VENTILATION TO MAINTAIN
VAPORS BELOW DISCOMFORT LEVEL. IN CASE OF INHALATION ILL EFFECTS,
REMOVE TO FRESH AIR. SEALANT RELEASES ACETIC ACID VAPOR (VINEGAR
ODOR) DURING APPLICATION & CURE. DO NOT HANDLE CONTACT LENSES WITH
SEALANT ON HANDS. FULLY CURED SEALANT IS NON-HAZARDOUS. (See MSDS for
additional information)
Contains Titanium Dioxide (White/Colors); added to Massachusetts Right to Know List,
Minnesota Hazardous Substance List, New Jersey Right to Know List, Pennsylvania Right to
Know List & Rhode Island Hazardous Substance List.
LIMITED WARRANTY
Recommendations for use of this product are based on tests we believe to be reliable. Manufacturer and seller are not
responsible for results where this product is used under conditions beyond our control. If when applied as directed, this material
peels, cracks or separates, it will be replaced without charge upon presentation of proof of purchase and used cartridge. This
limited warranty only applies to residential use and damages including consequential damage and other remedies are excluded.
No other warranties apply, including fitness for a particular purpose.
TDS Number: 0810TD, 0816TD, 0826TD Series (including Clear, White & Colors)
Date of Issue: January 17, 2012
SEE MSDS FOR ADDITIONAL DATA/INFORMATION