SDS

Red Devil, Inc. • 4175 Webb Street • Pryor, OK 74361 • Phone: [phone] • Technical Service: [phone] • Fax: [phone]
Website: www.reddevil.com Page 1 of 2
100% Silicone Sealant – 0810,
0816, 0826 Series -
Technical Data Sheet
Description
A high-performance 100% silicone sealant ideal for many
general purpose applications. Spec-compliant formulation is
available in Clear, White & various other colors. Cures upon
exposure to moisture in the air. Not paintable.
Key Features
• Meets various performance specifications: ASTM C920
Class 25, Fed Specs TT-S-00230C Class A and TT-S-
001543A, CEBTP 432.6 140-2, Mil Spec 46106A,
CGSB 19C9-9B, DIN 18540 Part 2, OREX 150031-2.
• Underwriters Laboratories Recognized Component
• Excellent UV resistance
• Excellent adhesion to many surfaces
• Mildew resistant when cured
• VOC Compliant
Uses
Adheres to Glass, Fiberglass, Ceramic, Non-oily woods,
Porcelain, Most metals, most plastics & rubbers & most
painted surfaces.
Surface Preparation
Surface should be completely clean, dry & free of
contaminants such as dirt, dust, grease, oil & other
residue or material that may interfere with adhesion.
Remove mildew by scrubbing with a solution of 4 oz.
TSP (Trisodium Phosphate), 1 quart of liquid bleach
mixed with 3 quarts of warm water. Protect eyes &
hands by wearing goggles/face shield & chemical
resistant gloves. Thoroughly rinse surface & allow to dry
completely prior to sealant application.
Directions
1. Clip off tip of spout @ a 45 degree angle to desired
size.
2. Apply using steady, even pressure to completely
bridge joints.
3. Smooth sealant for a neat appearance.
4. Wipe away excess with a dry cloth or towel before
surface skins.
5. After cure, carefully remove with a razor blade, taking
care not to undercut sealant bond to substrate.
Physical/Performance Property
Weight Per Gallon
Specific Gravity
Total Non Volatile % Solids (Weight)
Extrudability/Application (as packaged)
Consistency/Appearance
Odor
Base Polymer
Pigment/Filler
Freeze/Thaw Stability
Shelf Life
Slump
Artificial Weathering
Low Temperature Flexibility
Tooling Time
Tack Free Time
Cure Time
Shore A Hardness
Storage Conditions
Application Temperature
Service Temperature
Tooling
Paintability
Joint Movement Capability
Dielectric Strength
Dielectric Constant
Dissipation Factor
Volume Resistivity (X CM)
Mildew Resistance
Test Method
Gardner Cup
Calculated
Computrac Analyzer
Semco Gun (6 oz @ 50 psi)
Visual Observation
Subjective
Known
Known
Test Lab 0 F/77 F @24 hrs
Lab 50 C Oven – Accelerated
ASTM D2202 Jig
ASTM – QUV Tester
ASTM D746
Test Lab
ASTM D2377
Test Lab (77F/25C 3 mm thickness)
ASTM D2240
Test Lab
Test Lab
Lab Oven/QUV/Freezer/OE Fence
Test Lab/Field Evaluation
Test Lab/Field Evaluation
Test Lab
Test Lab (D887/D149)
Test Lab (D924/D150 @ 1 MHZ)
Test Lab (D924D150 @ 1 MHZ
Test Lab
Test Lab
Typical Result
8.50 +/- 0.50
1.02
> 93%
60 seconds +/- 10
Smooth, viscous paste
Vinegar (Acetic Acid)
Proprietary Siloxane blend
Amorphous Fumed Silica
Passes 5 Cycles
Minimum 1 Yr @ 77F
0
No Cracking @ 15,000 hrs QUV
Pass
5 to 10 minutes
10 to 20 minutes
24 hrs (cures approx 1/8 in/24 hrs)
26 +/- 3
40F to 90F – Original Container
10F to 100F
-60F to 400F (Intermit. To 500F @ full
cure)
Excellent @ 5 to 10 minutes
Not Paintable
+/- 25% (50% Total Movement)
22 KV/MM
2.7
0.002
2 X 10 to the 15
th
power
Excellent w/ good housekeeping