SDS

Page 4 / 8
RD-0076HDA -Adhesive – Water Clean-Up – Low VOC
Revision Date: 01-Oct-2017
9. PHYSICAL AND CHEMICAL PROPERTIES
Exposure Guidelines Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Calcium Carbonate
1317-65-3
-
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Kaolin
1332-58-7
TWA: 2 mg/m
3
particulate matter
containing no asbestos and <1%
crystalline silica, respirable
fraction
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 10 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Appropriate engineering controls
Engineering Controls Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual protection measures, such as personal protective equipment
Eye/Face Protection Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.
General Hygiene Considerations Handle in accordance with good industrial hygiene and safety practice.
Information on basic physical and chemical properties
Physical State
Smooth paste
Appearance
Off-white
Odor
Mild acrylic
Color
Off-white
Odor Threshold
Not determined
Property Note: The information below is not
intended for use in preparing
product specifications
pH 7.0-10.0
Melting Point/Freezing Point < 0 °C / <32 °F
Boiling Point/Boiling Range 98.88-104.44 °C / 210-220 °F
Flash Point > 93.33 °C / > 200 °F
Evaporation Rate Slower than n-Butyl Acetate
Flammability (Solid, Gas) Not determined
Remarks • Method
8. EXPOSURE CONTROLS/PERSONAL PROTECTION