MSDS

1
Material Safety Data Sheet
PAINTER’S CAULK – White – 0746BP, 0746CP
MSDS No. 0072HD
Emergency Phone No.
[phone]
SECTION 1 – PRODUCT NAME & MANUFACTURER INFORMATION
PRODUCT NAME
Painter’s Caulk – Acrylic Latex - White
MANUFACTURER’S NAME &
TELEPHONE NUMBER
Red Devil, Inc. 918-825-5744
STREET ADDRESS
4175 Webb Street
CITY / STATE / ZIP
Pryor, Oklahoma 74361
SECTION 2 – COMPOSITION / HAZARDOUS INGREDIENTS
% TLV PEL UNITS
PRODUCT CONSISTS OF:
Calcium Carbonate ** (1317-65-3) <60 10 15 mg/m3
Acrylic Emulsion Blend (mixture) <25 NE NE
Benzoate Ester (proprietary) <7 NE NE
Petroleum Distillate (64742-48-9) <1.5 100 100 ppm
Ammonium Hydroxide (7664-41-7) <0.25 25 50 ppm
Titanium Dioxide (13463-67-7) <1 10 10 mg/m3
Non-hazardous ingredients* <25 NA NA
*Unlisted ingredients are not considered hazardous under the OSHA Hazard Communication Standard (29 CFR
1910.1200).
Calculated VOC: <1.5%/wt (<25 g/L). CARB Compliance: Yes. Prop 65 Ingredients: Yes (See Section 16)
SECTION 3 – HAZARDS IDENTIFICATION
PRIMARY
ROUTE(S) OF
ENTRY
Skin Contact Skin Absorption Eye Contact Inhalation Ingestion
EMERGENCY
OVERVIEW
White paste product. Harmful if swallowed or absorbed through skin.
EFFECTS OF
OVEREXPOSURE
May cause eye, skin, nose, throat & respiratory tract irritation.
MEDICAL
CONDITIONS
AGGRAVATED BY
EXPOSURE
None known.
SECTION 4 – FIRST AID MEASURES
SKIN CONTACT
Wash w/ soap & water for @ least 15 minutes. Get medical attention if symptoms persist. Remove & wash contaminated clothing.
EYE CONTACT
Immediately flush w/ large quantities of water for @ least 15 minutes until irritation subsides. Get medical attention.
INHALATION
Remove to fresh air. If breathing difficult, leave area to obtain fresh air. If breathing remains difficult, get medical attention.
INGESTION
DO NOT INDUCE VOMITING. Get immediate medical attention.