SDS

4
________________________________________________________
Section 8 – Exposure Controls & Personal Protection
Use w/ adequate ventilation to ensure exposure levels maintained below limits
provided:
Component Exposure Limits
CAS No. Component Name Exposure Limits
1317-65-3 Calcium Carbonate OSHA PEL TWA: 15 mg/m3 total dust
5 mg/m3 respirable
fraction
NIOSH REL TWA: 10 mg/m3 total dust
5 mg/m3 respirable
fraction
Mixture Acrylic Emulsion NE
13463-67-7 Titanium Dioxide ACGIH TLV TWA: 10 mg/m3
64742-48-9 Petroleum Distillate ACGIH TWA: 5 mg/m3; ACGIH STEL: 10
mg/m3
OSHA TWA: 5 mg/m3
Personal Protective Equipment
Eyes/Face: Use approved safety goggles or safety glasses. If necessary, refer to
appropriate regulations & standards.
Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for
spill response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit).
If necessary, refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)
or appropriate Standards of Canada. Use foot protection, as described in appropriate
regulations & standards.
Respiratory: If mists or sprays are created, use appropriate respiratory protection. Oxygen
levels below 19.5% considered IDLH by OSHA. In such instances, use full-facepiece
pressure demand SCBA or a full facepiece, supplied air respirator w/ auxillary self-
contained air supply.
Section 9 – Physical & Chemical Properties
Physical Form: Paste (Textured)
Color: White/Off-white
Odor: Mild Acrylic
Specific Gravity @ 25C: ~ 0.75 to 1.50
Freezing/Melting Point: < 0 C (< 32 F)
Boiling Range: NE
Vapor Pressure @ 25C: NE
Vapor Density: Heavier than air
Evaporation Rate: Slower than ether
Relative Vapor Density (air = 1): Heavier than air
Solubility in Water: Not established
pH: 7 to 10
Note: The above information is not intended for use in preparing product specifications.
________________________________________________________