SDS
RD-0050CP - Pre-mixed Concrete Patch – Acrylic – Textured Gray - 
Tub   
Revision Date:    25-Sep-2013     
_____________________________________________________________________________________________   
_____________________________________________________________________________________________   
Page    4 / 9  
Incompatible Materials   
Strong oxidizing agents. Strong bases.     
8. EXPOSURE CONTROLS/PERSONAL PROTECTION   
Exposure Guidelines   
Exposure guidelines / protective equipment are for routine handling and accidental spills    
Chemical Name   
ACGIH TLV   
OSHA PEL   
NIOSH IDLH   
Crystalline silica   
  14808-60-7   
TWA: 0.025 mg/m
3
 respirable 
fraction   
(vacated) TWA: 0.1 mg/m
3
respirable dust   
:      (30)/(%SiO2 + 2) mg/m
3
 TWA 
total dust   
:      (250)/(%SiO2 + 5) mppcf 
TWA respirable fraction   
:      (10)/(%SiO2 + 2) mg/m
3
 TWA 
respirable fraction   
IDLH: 50 mg/m
3
 respirable dust   
TWA: 0.05 mg/m
3
 respirable 
dust   
Calcium Carbonate   
  1317-65-3   
-   
TWA: 15 mg/m
3
 total dust   
TWA: 5 mg/m
3
 respirable 
fraction   
(vacated) TWA: 15 mg/m
3
 total 
dust   
(vacated) TWA: 5 mg/m
3
respirable fraction   
TWA: 10 mg/m
3
      total dust   
TWA: 5 mg/m
3
      respirable dust   
Titanium dioxide   
  13463-67-7   
TWA: 10 mg/m
3
TWA: 15 mg/m
3
 total dust   
(vacated) TWA: 10 mg/m
3
 total 
dust   
IDLH: 5000 mg/m
3
Carbon Black   
  1333-86-4   
TWA: 3 mg/m
3
 inhalable fraction   
TWA: 3.5 mg/m
3
(vacated) TWA: 3.5 mg/m
3
IDLH: 1750 mg/m
3
TWA: 3.5 mg/m
3
TWA: 0.1 mg/m
3
 Carbon black in 
presence of Polycyclic aromatic 
hydrocarbons PAH   
Appropriate engineering controls 
Engineering Controls   
Ventilation must be adequate to maintain the ambient workplace atmosphere below the 
exposure limit(s) outlined in the SDS.     
Individual protection measures, such as personal protective equipment 
Eye/Face Protection   
Use approved safety goggles or safety glasses. If necessary, refer to appropriate 
regulations & standards.     
Skin and Body Protection   
Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill 
response. If necessary, refer to appropriate regulations & standards.   
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary, 
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate 
Standards of Canada. Use foot protection, as described in appropriate regulations & 
standards.     
Respiratory Protection   
If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below 
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand 
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.     
General Hygiene Considerations   
Handle in accordance with good industrial hygiene and safety practice.   









