MSDS

_____________________________________________________________________________________________
RD-0020 - Acrylic Create A Color® Sealant
Revision Date 01-May-2013
Exposure Guidelines
Exposure guidelines / protective equipment are for routine handling and accidental spills
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Petroleum Hydrocarbon
64742-48-9
ACGIH TWA: 5 mg/m
3
; ACGIH
STEL: 10 mg/m
3
- -
Appropriate Engineering Controls
Engineering Controls
Ventilation must be adequate to maintain the ambient workplace atmosphere below the
exposure limit(s) outlined in the SDS.
Individual Protection Measures, such as Personal Protective Equipment
Eye/Face Protection
Use approved safety goggles or safety glasses. If necessary, refer to appropriate
regulations & standards.
Skin and Body Protection
Skin: Wear chemical impervious gloves (eg: Nitrile or Neoprene). Use triple gloves for spill
response. If necessary, refer to appropriate regulations & standards.
Body: Use protection appropriate for task (eg: lab coat, coveralls, Tyvek suit). If necessary,
refer to OSHA Technical Manual (Sec. VII: Personal Protective Equipment)or appropriate
Standards of Canada. Use foot protection, as described in appropriate regulations &
standards.
Respiratory Protection
If mists or sprays are created, use appropriate respiratory protection. Oxygen levels below
19.5% considered IDLH by OSHA. In such instances, use full-facepiece pressure demand
SCBA or a full facepiece, supplied air respirator w/ auxillary self-contained air supply.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State
Smooth paste
Appearance
White in cartridge, paste. Custom color
matched after mixed, applied & 24 hrs
curing
Odor
Mild acrylic,
Color
White prior to mixing; after mixing &
application, bead dries to an exact
color match within 24 hrs
Odor Threshold
Not determined
Property Note: The information below is not
intended for use in preparing
product specifications
Remarks • Method
pH
~8.5-9.5
Melting Point/Freezing Point
< 0 °C / <32 °F
Boiling Point/Boiling Range
~98.88-104.44 °C / ~210-220 °F
Flash Point
> 93.33 °C / > 200 °F
Evaporation Rate
Not determined
Flammability (Solid, Gas)
Not determined
Upper Flammability Limits
Unknown
Lower Flammability Limit
Unknown
Vapor Pressure
Not established
Vapor Density
Heavier than air
Specific Gravity
_____________________________________________________________________________________________
~1.0-1.10 @ 25 °C (77 °F)
Water Solubility
Soluble in water
Page 4 / 8
Solubility in Other Solvents
Not determined