Specifications

OM-228 921 Page 16
SECTION 4 − SPECIFICATIONS
4-1. Weld, Power, And Engine Specifications
Welding
Mode
Weld
Output
Range
Rated Welding
Output
Maximum
Open-Circuit
Voltage
Generator Power
Rating
Engine
Fuel
Capacity
CC/DC
20 − 600 A
500 A, 40 Volts DC,
100% Duty Cycle
600 A, 44 Volts DC,
40% Duty Cycle
95
Standard:
Single-Phase,
4 kVA/kW, 20/17 A,
120/240 V AC, 50/60 Hz
Three-Phase Generator
Option:*
Single-Phase/Three-Phase,
12/20 kVA/kW, 50/48A,
120/240 VAC, 60 Hz*
In Addition To Standard
4 kVA/kW Generator Power
Kubota V3300-B
Water-Cooled, Four
Cylinder, 49.5 HP Diesel
Engine
25 gal
(95 L)
CV/DC
14 − 40 V 56
4-2. Dimensions, Weights, And Operating Angles
Dimensions
802 161-A
Front Panel End
D
B
A
F
E
H
G
C
! Do not exceed tilt angles or engine could
be damaged or unit could tip.
! Do not move or operate unit where it
could tip.
20°
20°
30°
30°
804 582-A
Height
50 in. (1270 mm)
(to top of muffler)
Width
28-1/2 in. (724 mm)
(mtg. brackets turned in)
30-3/4 in. (781 mm)
(mtg. brackets turned out)
Depth 69-1/2 in. (1765 mm)
A 69-1/2 in. (1765 mm)
B* 55-7/8 in. (1419 mm)
C* 46-3/8 in. (1178)
D* 9-1/2 in. (241 mm)
E 27-1/2 in. (699 mm)
F 1 in. (25 mm)
G 29-13/16 in. (757 mm)
H
9/16 in. (14 mm) Dia.
4 Holes
* With mounting brackets in center
position. Dimensions vary with loca-
tion of mounting brackets.
Weight
No fuel: 1808 lb (820 kg)
Lifting Eye Weight Rating:
2380 lb (1079 kg) Maximum
Meets IEC Srtandard 60−974−1