User manual

P a g e | 16
XXPRESS
USER MANUAL - 1.1
Install and test the xxpress unit using the following procedure:
1) Place the unit on the suitably selected working surface (as
specified above), ensuring that the ventilation holes
underneath and on the rear of the unit are not obstructed.
2) Connect the unit to the AC mains power outlet using the
mains power cord supplied or as specified in Section 4.
3) Switch the mains power on at supply outlet first, and then
switch the unit on using the power switch located at the rear of
the unit.
4) Touch the blue xxpress Power On/Off button located on the
front of the unit once and wait whilst the unit starts up.
This can take 30seconds as the unit initialises the system and
runs a self-test.
5) Start-up is complete when this screen is shown.