Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 82

MODE

MANUAL FOCUS

You can select either MANUAL or CONFIRM. The default is MANUAL.

MANUAL

When selected, all focus operations are manual.

CONFIRM

Enables the Center or Spot focus target square. This mode provides additional focus assistance to the

photographer using RED, YELLOW, and GREEN color changes to the focus spot window. Inadequate subject

illumination and/or contrast may interfere with normal Focus Confirm operation.

For best results with Focus Confirm, operators should 'rock' the focus ring -- focusing through the point of

optimum focusing and back again in decreasing amplitude -- as when 'zeroing-in' for precision manual

focus.

AUTO FOCUS

NOTE: The following menus will ONLY appear if a DSMC Canon Mount is installed with a Canon or Sigma

lens attached.

With a DSMC Canon Mount installed and a supported lens attached, available options become MANUAL,

CONFIRM, SINGLE, CONTINUOUS, TOUCH TRACK, and RACK. Default is MANUAL.

All settings except MANUAL place a single target square on the screen (depending on the ZONES selection)

that indicates where the image is in focus.

Pressing the designated button for spot focus (REDMOTE / Side Handle button A default) will cycle you

through each Focus Mode option in order as you press the button repeatedly.