Specifications

RED EPIC OPERATION GUIDE

955-0002_v4.0, Rev-A | 62

When FORMAT is selected, a FORMAT dialog box will appear allowing you to add Camera Identity and 3D

Position properties when formatting. When desired options are set, select FORMAT.

NOTE: If any clips will be erased on the attached media, you will be informed of the number.

PERFORM A BLACK SHADING CALIBRATION

Refer to SECONDARY MENUS > SETTINGS > MAINTENANCE > CALIBRATION for complete details for

performing a Black Shading Calibration.

ADJUST PROJECT SETTINGS

TIME BASE

The project TIME BASE defines the rate at which the footage will be played back. When changing the

project frame-rate, the sensor frame-rate will default to the project rate, but may be over-ridden using the

sensor frame-rate controls.

Multiple projects with differing time bases may be stored on a media cartridge (SSD).

To adjust the project TIME BASE, press the MENU button on the Side Handle or REDMOTE. Then use the

Scroll Wheel or Direction Keys to navigate to SETTINGS > PROJECT > TIME BASE and press ENTER. Adjust

to the desired value using the Scroll Wheel and press ENTER once more to confirm.