Specifications

RED EPIC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, Rev-A | 53
LAN:
Indicates communication via Ethernet
connection
Magnify:
Tallies 1:1 if magnify is selected
Media Status:
Media location and remaining
media capacity in %
Power:
Indicates D.C supply voltage or % of
remaining battery capacity Including current
supply voltage
Project Frame Rate:
Current project TIME BASE
Quality:
REDCODE setting
Quality:
REDCODE setting
Resolution
Record Resolution
Resolution
Recording Resolution
RIG:
Indicates 3D rig metadata is present
Shutter Speed:
Exposure Time (or Degrees)
Shutter Sync:
Indicates sensor shutter sync
status
TC:
Indicates presence of valid SMPTE timecode
signal
Timecode:
Current timecode value
White Balance:
Color Temp
Wireless Status:
Displays signal strength when
connected wirelessly
NAVIGATING MENUS
The primary method to navigate Menus is via the Scroll Wheel on the REDMOTE or Side Handle. Press Enter
to open the menu, and then rotate the Scroll Wheel clockwise to move right, counter clockwise to move left.
However, the Left and Right direction Navigation Keys (REDMOTE or Side Handle) or Adjustment Ring (Side
Handle) may also be used for this purpose.
The Up Navigation Key selects the Advanced Settings menu when pressed (if parameter has an Advanced
Settings menu).
As an example, position the Cursor under the Shutter Speed (24FPS) icon and press the UP Direction Key to
access advanced adjustment values for Shutter Speed.
USING TOUCHSCREEN LCD
If operating a Touchscreen LCD, camera menu navigation may be made through finger gestures.
To adjust a parameter value, simply touch it, and then swipe the finger left / right to adjust its value.
To access an advanced parameter settings display, press and hold down on the parameter icon.
Touch anywhere outside the overlay windows to enter the value changes and to hide the sub-menus.
To enter the Secondary Menus, touch the MENU icon .